Teenitor 3D Print Removal Tools with Sturdy Wooden Handle, Tool Kit for 3D Printer Spatula Palette Knife Painting Enhanced Version Pack of 5



buy now

$8.99



Weight:0.12kg Material: Stainless steel with wooden handle Color: Brown A great tool for your 3D printer-Stiff, flexible,rigid,functional,effective with 5 pieces, this set of tool minimizes damage to the printing surface.At the same time, the thicker neck is useful for removing rafts and for trimming off supports Directions for Use To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle. Next, use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print. When tilting the blade, twist the handle counter-clockwise if you’re working from the right side of the print. (If you are left-handed and starting from the left, twist the tool clockwise) If you cannot get the blade under the print to start, bring the left edge of the tool against a right-side corner of the print and twist the handle clockwise. Repeat until the corner lifts up enough to allow the blade to start getting under the print If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the toolEnhanced version pack of 5: it includes 5 sizes.you can choose a suitble one to help with prying out printed items.