There are many filament suppliers produce at high speed, the filaments are not well cooling and not dried enough, so keep lots of moisture inside .Moisture will make melt strength of filament decreased rapidly , and then bubbles,stringing, shrinking,warping,brittle,vacancy, etc , see some vacancy spread the surface on right vase of last photo above
Some customers said , 3DDPLUS pla black require higher temperature. Yes, that is right.
In traditional plastic industrial, many plastic processing at higher temperature and better melt strength is more expensive than that in lower temperature. The same kind of material which processing in higher temperature means better melt strength that is a key point performance in plastic processing since plastic should be melt flowing to shape. .
3DDPLUS pla has better melt strength, well cooling , dried and post treatment, less stringing, less shrinking, less warping,less vacancy when 3d printing, smooth and shiny model surface.
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With clear Silica Desiccant
Recommended Extrusion/Nozzle Temperature 195°C – 215°C (317°F – 415°F)
Spool Diameter: 7.87″ – Spool Width: 2.83″ – Spool Hub Hole Diameter: 2.95″
Length: 330m,Net weight :1kg, Gross weight : 1.3kg
New raw materials PLA 4032D from USA Naturaworks Ingeo,no recycle no rework plastic inside
Quality You Can Trust High Purity: PLA has low shrinkage rate, NO Warp, NO Burbles even print larger models perform well. Strong Toughness: Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, NO Jam Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc. HIGH SMOOTH SURFACE-Perfect printed model result,bright shiny and mirror black surface.