The operating principle of 3D printer is to establish a 3D model by your computer, and use slicing software system to do the slicing work for the 3D model then save to the SD card for ready to print. Made of high quality acrylic material + Steel rod (threaded & smooth), This kit include all the parts you need for building Reprap prusa i3 3D printer. this 3D printer has a simple structure, light and portable, beautiful and trendy. Especially suitable for DIY amateur, artistic design, architectural design, education, 3D photo studio, can be used for printing different items like small components model, decoration, etc.
Below is the video about how it works everyday in our office, please click this link : https://www.youtube.com/v/dk9CACwla2s
The printed plastic part are made by these machines.
Actually we have own this products for over one year, but we just started to sell it now. because we hope to went through all the details, and make sure all the components we selected are really useful, so customer can save time on worrying if it’s the hardware problem and focus on project only.
Therefore, if you meet any problems (I am sure you will meet dozens of problems and questions during the building process, and it’s normal), you can always contact us for technical support, because almost all the problems you will meet, we already met before, you are not just buying this product, you also get our experienced support for you. building a 3D printer is not an easy job, so if there’s some one you can ask, you will save a lot of time.
We have pre-installed the 3D printer firmware for you, so even you know nothing about firmware, you can still get it working. error range would be from 0.1~0.5mm (but in order to be more precise, some knowledge about the firmware is recommended)
Package list and Prusa i3 Specifications : please check the main picture for list.(1) We don’t adapt wade extruder, we upgrade the J-head to all metal MK8 extruder. If you use wade extruder etc, every time when you change the filament, you have to take them apart and calibrate it all again. it takes hours sometimes, so I would suggest you to use long distance extruder as below. it takes you only within 1 minute to change the filament.