1. Tips: -Shake gently and well before using. -Keep away from children, dust and direct bright sunlight. -Recommended temperature 20°C – 25°C for storage. -Wash the models about 30s by 95% or more concentration organic solvent or isopropyl alcohol. -Suggest to wear gloves and mask to avoid direct skin contact. -Wash with plenty of water immediately if you get direct skin contact with resin. 2. Resin Parameters: Bottom Exposure Time: 30s, each layer exposure time: 5~8s.Thickness of Layers: 0.05mm, Suitable for NOVA Elfin 3D printer only.Solidify Wavelength: 405nm Viscosity (25°C): 150-200MPa Density: 1.05-1.20 / cm3 Tensile Strength: 36-52Mpa Elongation at break: 11-20% Flexural Strength: 59-70MPa Flexural Modulus: 1.882-2.385Mpa Hardness (Shore D): 84D Heat Deflection Temperature: 80°C Glass Transition Temperature: 100° 3. Service: -Best-before date: 12 months -Any questions please contact with us directly, we will answer within 24 hours, excluded some holiday.✅【High Print Precision】 Photopolymer 3d resin is specially designed to avoid volume shrinkage,which ensures high precision of the print models, especial to dental and jewelry design.
✅【Great Stability】NOVA 3D 405nm standard rapid printer resin was designed to significantly reduce printing time with its excellent fluidity, work excellent with your NOVA Elfin 3D printer.
✅【Wide Applications】Compatible for most LCD DLP SLA 3D printers. Works better with LCD 3D printer. Apply to DIY, jewelry design, classroom teaching and garage kits making etc.
✅【Pure and Vivid Colors】This UV curing 3d resin for LCD DLP 3D printer with low odor & high quality pigments inside, it make the print works show bright and stunning color effect.
✅【Quality Guarantee】We pride ourselves on providing caring service, both before and after the sale. Our support will respond to all inquires within 24 hours, excluding some holidays.