Screen: 2.8 “touchscreen
Slicing software: LONGER
Connection: TF card
Rated Power: 41W
Printer Size: 170 (L) * 170 (W) * 360 (H) mm Print Volume: 3.86 “( L) x 2.17 “(W) x 5.5” (H) (98 x 55 x 140mm)
Printing material: fine resin, cast resin, dental resin, etc.
Total weight: 7kg
1. Avoid direct contact with the skin when handling the resin. Rinse thoroughly with water in case of accidental contact.
2.Remove the tank resin in the storage bottle if the printer is not used for more than 2 days.
3.Make sure there are no solid residues from the previous print when you start a new print.
4.Clean the bowl with cloth cloths when changing the resin.
5. Printed objects can be further cured under solar.
1 x Orange10 3D Printer
1 x Steel Scoop
1 x Ethernet Cable
1 x power adapter
2 x filtration funnel
2 x gloves
1 x tool
5 x card
1 x film output
1 x TF card【SLA 3D Printer】Entry-level UV light curing LCD 3D printer. Machine preassembled and easy setup. Rapid prototyping with high precision details. LCD printers have higher precision than FDM printers.
【Parallel LED Lighting】Improved printing quality, curing speed and substrate adhesion with parallel LED lighting and uniform lighting intensity distribution.
【Smart and Fast Slicing】LONGER self-developed slicing software. Output 100M slicing file in 1 minute, 3 times faster. Smart support generation in one-click, enhanced cross-link structure. Also supported by CHITUBOX.
【Easy to Use】Full color touch screen, preview and monitor print status in real-time. Easy leveling. Robust adhesion. Safety temperature warning system.
【Warranty and Service】12-Month machine warranty (4.5” LCD Screen and FEP film excluded) and Lifetime Technical Support. High-efficiency and considerate community support on Facebook.