HONGDAK, 3D PLA Printing, 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1KG Spool(2.2LBS), 1.75 mm, Purple, PLA-1000g-1.75mm-PURPLE



buy now

$21.49


PLA(poly lactic acid)
PLA, or Poly Lactic Acid, is made from organic material – specifically cornstarch and sugarcane. This is why it is called ‘the green plastic’. This makes the material both easier and safer to use, while giving it a smoother and shinier appearance that’s more aesthetically pleasing. The thermoplastic is also more pleasant on the nose, as the sugar-based material smells slightly sweet when heated opposed to the harsh smell often associated with ABS. However, while PLA might seem like a better overall choice at first glance, it features a far lower melting point than ABS. This means that using printed parts for mechanical operations, or even storing them in high-temperature locations, can result in the part warping, cracking, or melting. The material is also weaker than ABS, though, it can achieve a superior level of print detail and is less prone to errors while printing.

Frequently Asked Questions

1) Filament not extruding properly?
A: Check the type of filament you’re working with and set the proper extruder temperature based on the filament type and heated build platform if applicable; trial and error. Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament, then decrease the temperature by 5°C until properly extruded. Please note this will vary with each 3D printer.

2) How do I store my filament?
A: Most filaments tend to absorb moisture from the air; because of this your filament can become brittle and slowly degrade the quality. It’s recommended to keep unused filament and store it in a storage container or zip lock bag with a desiccant.
3) Is your filament tangled?
A: Check that the spool is spinning smoothly on the mount.

  • Can be printed on a cold surface
  • More environmental-friendly
  • Shinier and smoother appearance
  • Higher 3d printer speed

PLA 3D PRINTING FILAMENT: 2.2LBS/1KG Dimensional Accuracy of +/- 0.03mm. Compatible most 3D printers and pens.