Glarks 29Pcs 3D Printer Nozzle with Nozzle Replacement Tool Kit, 7Pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm Brass Nozzle and 18Pcs Cleaning Needles and 3Pcs Nozzle Change Tool with Tweezer
✈ Extruder nozzle material: Brass
✈ Nozzle thread: M6
✈ 7mm screw socket fit for E3D nozzle
✈ 17mm wrench fit for 16x16mm heat block
17mm flat wrench x 1
Dual head socket wrench x 1
7mm socket x 1
Handle x 1
0.2mm extruder nozzle x 1
0.3mm extruder nozzle x 1
0.4mm extruder nozzle x 2
0.5mm extruder nozzle x 1
0.6mm extruder nozzle x 1
0.8mm extruder nozzle x 1
0.2mm cleaning needles x 2
0.4mm cleaning needles x 10
0.6mm cleaning needles x 2
0.8mm cleaning needles x 2
1mm cleaning needles x 2
Tweezer x 1
Total Quantity: 29Pcs
♣【How to change the nozzle: 】
✿ Prepare the nozzle, spanner, wrench.
✿ Heating. Turn on the 3d printer, set the nozzle temperature to target (PLA: 80-220, ABS: 240-280).
✿ Removing. After the heat done, use spanner to hold the heat block firmly, then use the wrench to screw old nozzle out.
✿ Adding. Put new nozzle to the socket and screw nozzle in, make sure the screw in tight and the work done.
✿ Warm Prompt: When heating, the old nozzle will be very hot, please do not touch them by hands.
If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.
★【What You Get:】In this 3d printer tool set, it include 1pc flat wrench, 1pc dual head wrench, 1pc 7mm socket, 1pc handle, 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm brass nozzles, 18pcs 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm cleaning needles, 1 tweezer total 29pcs are well packed in a case.
★【Extruder Nozzle:】Come with 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm nozzles, high quality brass material, m6 thread. Compatibility for Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer.
★【Pratical Wrench:】Set include 1 flat wrench which open mouth width is 17mm, a 7mm socket fit for E3D nozzle, a mini socket wrench and a handle for you to change out a nozzle. They will fimly hold and without damage to the heat block, no yanking on frail wiring.
★【Cleaning Needles:】Come with 18pcs 0.2mm, 0.6mm, 0.8mm, 1mm cleaning needles, each for 2pcs, 0.4mm for 10pcs. They are stored in 2 round tube. Which are used for cleaning 3D Printer nozzles and solve the filament clog problem, remove excess filament quickly.
★【Quality Assurance:】If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.