Esrover® 3d Stereoscopic Printing Pen for 3d Drawing Doodling with Free 30g ABS Filament (Blue)



buy now

$99.99



Thank you for choosing Esrover’s products, for your best experience of the 3D printer pen!!!! 

Product packing list :

1. 3D stereoscopic printing pen

2. 12V3A power adapter

3. 1 Volume 3 colors *10g/color abs filament

4. Manual (in English)


FAQ

Operation Guide:

1.Put the power adaptor AC plug into the outlet and insert the DC plug into the “power input” hole, the yellow LED turn on and the pen is started and standby.

2.Press the “wire feeding” button, the red LED turn on and the pen is under preheating. After 0.5-2 minutes later,the red LED turn to blue , preheating finished the pen is ready to use.

3.Insert the consumable material into the “wire loading hole” which is at the end of the pen, the other hand keep on pressing the “wire feeding” button, the material will be loaded by built in motor. Wait there is plastic liquid come out from the nib nozzle, the material loading is succeed.

4.Painting. (The speed controller can adjust the spray amount according the moving speed, no need to use both hands)

5.Do not touch the nozzle and heating parts during the drawing for your safety.

6.The device will switch to standby model if stop using over 5 minutes. The “working LED” will turn off, when use again,need press the “wire feeding” button to restart.

7.When need to unload or change the material, please repeat the step 2 and keep on pressing on “wire unloading” button.

Draw in the air and create 3D masterpieces.