BZ 3D Controller Board MKS SGen L V1.0 32-bit Motherboard Compatible Uart/SPI Open Source Marlin2.0/Smoothieware with MKS TMC2208/2209 Steep Motor Driver for 3D Printer Parts (Board+TMC2209 V1.05)



buy now

$56.98



Input voltage: 12V-24V
Support Print format: G-code
MPU: Cortex-M3 100MHZ
Support Display:MKS TFT24/28/32/35 ect
Support machine:XYZ、 delta、 kossel、 Ultimaker、 corey

Packing List:
1* MKS SGEN L+1*USB Cable+5*TMC2209+20*Jumper caps

★Drive mode setting

There are three drive mode settings: normal mode, UART mode and SPI mode.
Note: The following drive settings are based on the mks series drive, and different brand drive setup methods may be set differently.
1.Normal mode (step/dir mode)
In the case of normal mode, basically all drivers are available.
Adjust the driven subdivision by the jumper cap. According to your own needs, the jumper cap can be inserted into the M0, M1, M2 of the two rows of black pin headers on the right side to realize the adjustment of the subdivision.
Note: In the normal mode, the fourth pin is recommended without a jumper cap. However, wearing a jumper cap may affect the use of some drives.

2.TMC2130 SPI Mode
Due to too much content, please contact me if needed.

3.TMC2208 UART Mode
Due to too much content, please contact me if needed.

★Printing connection and driver installation
If it needs to connect computer to print, the computer needs to be installed a USB driver to recognized the COM port.
Note: only update the motherboard firmware, can motherboard COM port be recognized by computer.
The USB driver of Smoothieware can be download and install via official website, or get zipped files from customer service staffs and technicians.
★MARLIN2.0 firmware
If the marlin firmware is updated, but the computer recognizes it as an unknown device, you can right-click to select the update driver and select the path to update the driver.

★If you need more detailed information on changing the firmware, how to use the board and MKS series drivers and displays, please contact me.★Adopt 32-bit Cortex-M3 LPC 1768 chip, 100MHZ frequency, strong computing power, performance greatly improved.In-line and external driver port, more expandable and selective.
★Compatible with multiple drivers and special modes (TMC2208 UART mode, TMC2130 SPI mode, etc.),dedicated port reservation, convenient for wiring settings .
★Use high-quality PCB, and the corresponding pins of each interface are marked with silk screen for easier identification and modification.Using a dedicated power chip, support 12V-24V current input.
★Support lots of open-source firmwares, including smoothie-ware and Marlin V2.0.Compatible with multiple drivers and special modes (TMC2208 UART mode, TMC2130 SPI mode, TMC2209 UART mode etc.),dedicated port reservation, convenient for wiring settings .
★Support the MKS LCD12864, MKS MINI12864 and other controller boards developed by Makerbase.Compatible with all of MKS TFT touch screens.