Black PLA 3D Printing Filament 1.75 mm, 2.2 LBS (1KG) Dimensional Accuracy +/- 0.02 mm

buy now


TRONXY is a professional 3D printer AND filament manufacturer
Quality is our top priority as we hand check each spool and vacuum seal.

♫ There are many filament suppliers produce at high speed, the filaments are not well cooling and not dried enough, so keep lots of moisture inside .Moisture will make melt strength of
filament decreased rapidly , and then bubbles, stringing, shrinking, warping, brittle ,vacancy, etc , see some vacancy spread the surface on right vase of last photo above
♫ Some customers said , TRONXY PLA black require higher temperature. Yes, that is right.
♫ In traditional plastic industrial, many plastic processing at higher temperature and better melt strength is more expensive than that in lower temperature. The same kind of material
which processing in higher temperature means better melt strength that is a key point performance in plastic processing since plastic should be melt flowing to shape.
Check out our store for new and latest colors and materials for your 3d printer.

Ultra smooth technology
With our ultra smooth technology, our filaments are capable to extrude beautifully and smoothly that help to build a more delicate object.
Vacuum sealed
Our vacuum sealed packaging guarantees you to experience the best performance by isolating moisturized environment to the filaments.
High compatibility
Our filaments had been tested on various brands of 3D printer in the market and with positive customers’ feedback.
High Purity
PLA has low shrinkage rate, NO Warp, NO Burbles even print larger models perform well.
Strong Toughness
Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, NO Jam Compatible with all FDM 3D printer such as Makerbot, Mendel, Prusa, Huxley, BFB series, RepRap, Rapman, Solidoodle etc.

1 KG (approximately 2.20 lbs) Spool,1.75mm Filament Diameter (Dimensional Accuracy +/- 0.02mm),PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant.Recommended Extrusion/Nozzle Temperature 180°C – 210°C (356°F – 410°F)