An affordable price and high quality. SparkMaker is ideal for scale prototyping as well as general 3D printing.
We wanted to make 3D printing as easy and user friendly as possible.Unlike other SLA 3D printers that require a computer connection,SparkMaker supports offline printing.
Simply insert an SD card with a pre-loaded design, press the print button and your creation begins to take shape.
Monitoring your print projects is easier too with SparkMaker.It has a jumbo LED light with three different colors to indicate the printing progress.
How to use Sparkmaker:
Step1:Add model to SparkStudio to add support and slice
Step2:Save the slice file to SD card.
Step3:Level platform when first print (No need to level again next time).
Step4:Loosen the four screws on both sides of the platform.
Step5:Rotate the knob drops the platform to the lowest point
Step6:Press down the platform and tighten the four screws on both sides of the platform.
Step7:Pour the resin into resin tank(Less than 120g resin)
Step8:Insert the SD card into the slot (Face down).
Step9:Press the button and start to print
Step10:The print is finished.
Step11:Loosen the handle and remove the platform
Step12:Remove the supports of model
Step13:Clean the model with 99% alcohol
Step14:Irradiate the model with UV-light about 2-3mins.
Step15:Finally,get the model.
Matters needing attention:
1.※When connecting the printer,You should plug in the DC port first,and then plug in the socket.
2.The SparkMaker 3D Printer should put in a place without strong light.
3.UV cover should be put on the SparkMaker Printer when printing.
4.The SD card’s capacity should not more than 32G and should be formatting when first use.
5.Avoid looking at UV light and you should wear goggles.
KINDLY REFER USER MANUAL BEFORE USE.Large Build Volume: 98 x 55 x 125mm. Means that SparkMaker is ideal for scale prototyping as well as general 3D printing.