It’s Time to Materialize Your 3D Dreams!
The Homecube 3D printing pen,which can be used to draw a 3D project to bring your designs from paper to real life.
Specifications and parameters:
Temperature: 60℃-230℃ adjustable
Working power: 12V 3A
The nozzle diameter: 0.7mm
The power cord length:1.8m
Using Your 3D Pen:
Step 1:Connect the power adaptor to the back of the 3D pen and plug it into a power source. When the yellow LED turns on, the pen is in the preheat status.
Step 2:Press the “wire feeding” button, so the red LED turns on. After 30 seconds, the red LED will turn into green, preheating is done and the pen is ready.
Step3:Insert the ABS or PLA filament into the “wire loading hole”which is at the end of the pen. Keep on pressing the “wire feeding” button, the material will be loaded by built-in motor. Hold till the plastic material comes out from the nozzle nip, so the material loading is finished.
Step4:Keep pressing the wire feeding button and draw your 3D objects. The speed of extrusion is adjustable by speed controller. Releasing the button will cause the pen to stop extruding.
Step5:When you want to unload or change the filament, you should press the wire unloading button, You may need to adjust the speed controller.
NOTE: Unloading the filament after each use is highly recommended. You need to cut the material ending to smooth before loading.
1 x 3D Pen
1 x Power adaptor
1 x Saftey holder
3 x Filament
1 x User’s manual
SAFETY AND WARNING INSTRUCTIONS:
The 3D printing pen is suitable for children over 6 years old and adult. Use by children must be under tutelage of adult.DEVELOP IMAGINATION:The Homecube 3D stereo drawing pen is a great tool for anyone interested in 3D modelling, which can be used to draw a 3D project to bring your designs from paper to real life.It can draw on the paper or surface or in the air,it is a great gift for any occasion!