3D Printer MKS GEN L Motherboard +12864 Display + 5A4988 for Flyingbear-P905X



buy now

$33.20


MKS GEN L Description:

1.Assemble 2560 and ramps1.4 on a board to solve the problem of complex interface and easy failure of Ramps1.4 interface.

2.Users can replace their own motor drivers, supporting 4988 drivers and 8825 drivers, TMC2100 drivers.

3.Reserved external drive signal, can be connected to the external drive to drive 57, 86 motors.

4.The use of high-quality MOSFET tube, heat dissipation better, to ensure long-term stability.

5.The use of dedicated power chip, support 12V-24V power input, to solve the Ramps voltage conversion chip heating, inadequate power supply problem.

6.Stable and reliable filter circuit greatly reduces the possibility of interference, and avoids the phenomenon of crash and running in the printing process.

7.The use of CH340 serial chip, in order to ensure stability and reliability, reduce costs, but also solve the past 16U2 difficult to install drive problems.

8.24V input can be accepted. Under the same system power, the hot bed current can be reduced to 1/4, effectively solving the problem of heat pipe MOS heating.

9.The use of open source firmware Marlin,ramps1.4 exactly the same, can directly replace Ramps1.4.

10.Can be directly connected to 2004LCD display and 12864LCD display, can support TFT28, TFT32 touch screen.

Pakage include:

MKS GEN L motherboard *1

TFT32 display screen

A4988 drive *5

Heat sink *5

USB line *1

Grey line *1

Name: MKS GEN L Motherboard +TFT32 Display + 5*A4988

PCB size: 110mm x 84mm

Net weight: about 210g

Mainboard Color: Black

Material: CCL

suitable for driving the stepper motor below 8V-35V 2A.