3D Printer Accessories Cr-10 Hot End Kit Full Assembled Extruder Kit Nozzle Kit for 3D Printer Assembled Extruder Hot End Kit Cr-10s Cr-10 S4

buy now


C.W.USJ products are favored by consumers because of “high quality and low price”. They are exported to the United States, Canada, Mexico and some surrounding European
Product Description:
– Material: Aluminum+Stainless Steel+Brass
– Installation type: External thread connection
– Nozzle size: 0.4mm
– Thermistor and heater cable length: 1M
– Throat pipe length: 30mm
– Aluminum block size: approx. 20 x 20 x 10mm
– Operating temperature range: -40~+260°C (-40~+500°F)
– G.M.: 355g
– N.W. : 263g
– Applicable models : Cr-10 mini cr-10 cr-10s cr-10 s4 cr-10 s5

Packing List:
1 x Aluminum Block
1 x Heating Tube
1 x heated aluminium block (20*20*10mm)
1 x 0.4mm Brass Nozzle
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor + Brass Sleeve
1* stripline thermistor and 1*thermal protection copper sheath
1*Laryngeal tube : M6*30mm, diameter of one end of thread inner hole 4mm (inner hole size) depth 25mm, diameter of the other end inner hole

Purchase tips :
1. Before purchasing, please check whether the fittings match the type of machine used.
2. After receiving the spare parts, check whether the spare parts are identical with the purchased model or if there is any damage.
3. When installing, if there is any problem, please contact us at any time or you can leave your personal email address, We can send you installation instructions.
4. NOTE : The size is measured by hand. There will be slight difference, thank you for your understanding.
Quality Guarantee: it is 100% brand new. We strictly control each production steps to guarantee that the product is delivered to you without any defect for your satisfaction is our driving force.

Before you give us neutral or negative feedback, we kindly ask you to contact us immediately so that we can solve your problem satisfactorily.♥Simple design, fast installation. Easy to use and apply.
– The fan cooling and printing can effectively keep the temperature of the heating block unaffected by the surrounding flow wind and improve the printing quality.
– Better temperature resistance and longer service life, supporting the use of PLA, ABS, TPU, HIPS, WOOD, PETG and other materials.
– Nozzle tip, aluminium heating block, through throat pipe, insulating cotton, direct ventilation joint, 4010 cooling fan, 4010 turbine fan, aviation joint.
– Work with different sizes of MK8 nozzles: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzles.